96, 144 & 196

S-Turn Garment Finisher
Available in Gas or Steam Models

Several design features have been combined to form the steam zone for the IS Series finisher. This new “S-Turn” design provides superior quality in the same footprint of previous designs. Executing two back-to-back 90 degree turns, the garments fan open exposing their centers to direct steam injection. The result is deeper penetration of steam to the center of the garment and better saturation of the fibers to facilitate the finishing process.

Click here to view the video.

View Product Details

16-GH, 24-GH & 32-GH

Patented Modular U-Turn Garment Finisher

With the patented modularity of the V Series tunnel finishers, you will never have to worry about your production need exceeding your tunnel’s output. Leonard Automatics’ Simple Addition add on module will keep your tunnels capabilities right in line with your growing business. This may be the last tunnel you ever buy.

The V Series U-turn tunnel finishers are the perfect fit for high volume industrial laundry applications. The U-turn configuration allows for higher production within a relatively small footprint while containing the heat and controlling the airflow more efficiently than in standard straight through models.

Click here to view the video

View Product Details

16-GH, 24-GH & 32-GH

Triple Pass Tunnel Finishers

The unique design of the VTP Series allows for better containment of steam in the conditioning chamber as well as less atmospheric draw from outside the tunnel. This provides greater heat transfer for higher evaporation rates which increases production while producing a higher quality finish than standard methods of garment finishing.

For the last 30 years, you have had two choices in tunnel finishers: straight through and U-turn. The new VTP Series (patent pending) is a leap forward in the evolution of garment finishing technology. This radical new design provides higher production rates, increased quality of finish and greater energy efficiency, all the while maintaining the high standards of workmanship, quality components and long life you expect from a Leonard tunnel.

View Product Details

The Transporter Conveyor chain is the only chain offered to the laundry industry that is constructed of stainless steel. This construction not only provides greater pull strength, but also the corrosion resistance needed for long-term operation in a garment finisher.

Click here to view the video.

View Product Details

Leonard Automatics has designed a cost effective, high production small piece folder that is easy to use, easy to maintain and gentle on the budget.

Performing a “French Fold” lateral fold and either two or three crossfolds, the LTF-2000 will fold anything from a bar mop to a bath  towel (maximum piece size is 72″ x 33″).

Belt speeds of 180 feet per minute is more than enough to keep up with your fastest workers while a knife between pinch roll  crossfolds ensures accurate folds and crisp lines.

View Product Details

This stacker beats any other method of handling small flatwork pieces. It accepts napkins, bib aprons, towels and other small pieces up to 22″ (559mm) wide, right from your ironer, then automatically stacks and counts them. Now one operator can handle up to 5,000 pieces per hour – and still have plenty of time for other chores. No more back-of-the-ironer bottlenecks! And no matter what method you’re using now, you can reduce your labor costs, increase your productivity, deliver more accurate counts, and boost your profits in the process.

View Product Details

The Patented Automatic Lint Filtration System

Proper airflow and heat distribution are important components of the performance of your garment finisher. Clogged lint filters compromise these crucial factors resulting in uneven and inconsistent finished product.

The patented AutoFilter is designed to address this very issue. By automatically cleaning itself while the finisher is in operation, the airflow and temperature within the tunnel will be more consistent; therefore, the tunnel will provide better overall garment quality and production rates. Modular by design, the AutoFilter can be added to existing U-Turn style tunnel finishers.

View Product Details

A “cam style” auto-loader for pendant conveyor systems is an ideal addition anywhere high volume is needed. The auto-loader is fed by a ten foot stainless steel twist conveyor to provide a constant supply of garments. A proximity sensor detects the presence of a hanger on the cam which opens the solenoid to actuate an air cylinder feeding the garment to the conveyor.

Ideal for high production plants, this unit is able to maintain the production rates your facility requires. The loader comes with required sensors and can either be installed as a stand alone unit or as a fully integrated unit.

View Product Details

Automated Temperature Controls

Historically, tunnel finishers only measured air temperature. Now, with the addition of this option you have the power to actively monitor garment temperatures in real time while your tunnel is in operation. The tunnel will know when the garments within have reached a dangerously high temperature and will dial back the burner enough to keep the garments from being damaged and wasting energy.

A graph, rendered in real time, shows garment temperature trends giving the operator unprecedented control over the finishing process. Target garment temperatures can now be accurately controlled for the highest quality finish.

View Product Details